Galiso OPTI-LITE 사용 설명서 - 페이지 10

{카테고리_이름} Galiso OPTI-LITE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galiso OPTI-LITE 18 페이지. Fiber optic light guide

4.0 OPTI-LITE OPERATIONS

A. Once the Light Guide has been inserted and Illuminator box is plugged in,

turn the ON/Off Intensity Control Knob to power on.

B. NOTICE: When switching on a cold Illuminator Box, leave the intensity control

at low intensity for a minimum of ten seconds before increasing to full

intensity. This will allow the Lamp to warm-up, helping to extend the Lamp

life. After using the OPTI-LITE, return Intensity Control Knob to low and allow

a cool down time of one to two minutes before turning the unit off.

C. After the above steps have been performed, the Light Guide can be inserted

into the cylinder neck to proceed with inspections. Always avoid looking

directly into the Light Guide once the unit has been turned on.

A. Although halogen lamps are an inexpensive and effective light source, they

can degrade by an average of 15% over the lifetime of the lamp. Furthermore,

new lamps of the same brand and model number may vary +/- 20% in

maximum intensity, depending on the batch.

B. Under normal conditions, lamp manufacturers recommend halogen lamps be

operated above 80% of their rated intensity for optimum and stable lamp

performance.

21-11-1180

Section 4 - 1