Galiso OPTI-LITE 사용 설명서 - 페이지 15

{카테고리_이름} Galiso OPTI-LITE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galiso OPTI-LITE 18 페이지. Fiber optic light guide

5.0 MAINTENANCE, continued

5.5 Troubleshooting, continued

C. The Light briefly turns on and then off; Fan operates

1. The Lamp may have a faulty filament. Turn the Intensity Control Knob to

maximum setting to the test lamp.

2. If the Lamp fails, replace the Lamp (See 5.2 Lamp Replacement).

3. Examine the Lamp Socket assembly for damage and continuity.

D. The Light will not turn on, Fan operates

1. Replace the Lamp (See 5.2 Lamp Replacement).

E. The Light is dim or non-existent; Fan does not operate

1. Make sure to use the correct model for the power available. Running a 240v

unit in 120/100v conditions will stop the fan and dim the lamp.

F. The Light is on; Fan does not operate

1. Return to Galiso, Inc. by calling (800) 854-3789 to receive a return

authorization number and shipping instructions.

G. The Light is off; Fan does not operate

1. Make sure the power cord is inserted completely into the IEC connector and

also into the correct power source.

2. Check the power cord for damage.

3. Check the fuse.

H. The Light Guide is burning

1. Check the fiber type. If a Light Guide is in use that is not a Galiso, Inc. fiber

optic Light Guide, it may be plastic and susceptible to burning. Using a glass

fiber Galiso, Inc. Light Guide is recommended.

2. Some epoxy types cannot withstand the high temperatures developed in the

light source. Call the supplier if there is any question as to the epoxy used to

manufacture the fiber optic input.

3. Check the Lamp type. Replace the Lamp with Galiso, Inc. approved part

number: 85-11-0028, EKE 150W, (See Table 5-1, Spare and Accessory

Parts). Light Guides damaged by use of non-approved Lamps will void the

fiber warranty.

Section 5 – 4

21-11-1180