Dynatech T-25UD 사용 지침 및 유지 관리 매뉴얼 - 페이지 4

{카테고리_이름} Dynatech T-25UD에 대한 사용 지침 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynatech T-25UD 9 페이지. Ucm unit
Dynatech T-25UD에 대해서도 마찬가지입니다: 사용 지침 및 유지 관리 매뉴얼 (8 페이지), 사용 지침 및 유지 관리 매뉴얼 (9 페이지)

SD-Box + Star A3 Beta+ ASG 1XX + T-25 Instruction Manual
Code: DYN 62.06.00
Date: 25/02/2020
INTRODUCTION
DESCRIPTION
This system is made up of a SD-BOX signal control box, STAR overspeed governor, T-25 steering mechanism and
ASG-1XX progressive safety gear, everything manufactured by Dynatech. This system operates as a complete
system of protection against car uncontrolled movements with the door open, also known as UCM.
This unit complies with the EN 81-20:2014 and EN 81-50:2014 standard by using the SD-BOX as a signal
management system, the governor as a UCM detection component and the safety gears as braking components.
The entire system stops the car when a UCM occurs at a distance lower than 1 metre in accordance with the standard
requirements.
This protection system is certified as detection and braking device in the scope of protection against car uncontrolled
movements with door open. Furthermore, each component making up the system has also been individually certified
for this purpose; obviously, without negatively affecting its certification as overspeed governor and progressive safety
gears when descending and braking component against overspeed when ascending.
UCM certification also includes the combinations between the different versions of these component models.
COMPONENT
SD-BOX + STAR A3 BETA+ ASG 1XX + T-25
ASG 1XX UD/ASG 1XX
The assembly of this safety package in an installation exempts the installation itself from requiring the UCM certificate
but not from checking that the unit is in compliance with the standard's requirements. The installer must be held
responsible for fitting the system in the installation and checking its correct working order.
RISKS AND SECURITY WARNINGS
RISKS
Electrical hazard
Electrical hazard

SECURITY WARNINGS

Reference to the manuals for use and maintenance of the different components making up the unit is
recommended before their installation.
The SD-BOX + Star A3 Beta + ASG 1XX/ASG 1XX-UD + T-25/T-25 UD unit is valid for installations where
the P/Q ratio is above 0.7.
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/
Revision: 00
SD-BOX
STAR
Do not handle or open the box with its terminals connected to
Never handle the STAR overspeed governor's interlocking
CERTIFICATE
TRI/DAS.IV-A/001353/20
TRI/DAS.IV-A/001315/20
ATI/LV/009
ATI/PP/010
the SD-BOX´S electrical power supply.
coil.
2