HighGear Summit 사용자 설명서 - 페이지 15

{카테고리_이름} HighGear Summit에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HighGear Summit 20 페이지. Time, compass, barometer, altimeter, chronograph, and alarm
HighGear Summit에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지)

페이지 인쇄

ALTIMETER DATA LOG MEMORY

TABLE OF CONTENTS

CLEARING DATA INFORMATION

To Clear the information in the Altitude Data memory,

show the word HOLD flashing in the center line of the display with the words CLEAR – ALL in the top

and bottom lines respectively. Continue to hold the

with 4-dashes in the middle line indicating all data has been cleared from memory.

ALTIWARE SERIES

PRESS & HOLD

the

key. The display will

key until DATA 01 appears in the top line along

CHRONOGRAPH

TABLE OF CONTENTS

The Summit/Altitech 2 features a sophisticated digital CHRONOGRAPH timing system capable of

storing multiple timed workouts. The chronograph has a resolution of 0.01 seconds and displays both

lap time and split time on screen simultaneously.

WHAT ARE LAPS AND SPLITS

The Summit/Altitech 2 displays both LAP and SPLIT times on screen.

A LAP is a discrete period of time from when the CHRONOGRAPH

has started (Lap 1) or since the end of a previous lap. A SPLIT is the

cumulative total of all previous LAPS. Any time an individual lap is timed

it also automatically generates a corresponding split.

OPERATING THE CHRONOGRAPH

TIMING LAPS AND SPLITS

The Summit/Altitech 2 is capable of timing up to 100 LAPS and

SPLITS. These can be stored in any combination in up to 30 individual

Runs or workouts. While the CHRONOGRAPH is running, the top line

will display the time of the current lap, the middle line will show the

time for the current Split. When the timing of a Lap/Split is initiated

the bottom line will show the number of the Lap/Split for approxi-

mately 5-seconds.

summit/altitech 2