HighGear Max 사용자 설명서 - 페이지 6
{카테고리_이름} HighGear Max에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HighGear Max 19 페이지. Highgear pulseware duo heart rate monitor: user guide
HighGear Max에 대해서도 마찬가지입니다: 빠른 시작 지침 (2 페이지)
페이지 인쇄KEYS AND THEIR FUNCTIONS
KEY ACTIONS – QUICK PRESS VS. PRESS AND HOLD
There are two key actions used to program the watch:
QUICK PRESS
or
PRESS
The key is pressed quickly and immediately released. This is the most
common key action and is used for most aspects of operation.
PRESS & HOLD
The key is pressed and held for 2-3 seconds. This key action is
generally used to initiate a programming or memory sequence or to
enter a sub-mode.
NOTE 1: Generally, when entering a setting sequence, the
word
HOLD
will appear on the top line of the display.
NOTE 2: In this manual, we will indicate when a
HOLD
is required.
In most other instances a
QUICK PRESS
should be assumed.
9
PROGRAMMING THE WATCH – COMMON KEY
ACTIONS
ENTER A PROGRAMMING SEQUENCE
PRESS & HOLD
the
EL/SET
EL/SET
EL/SET key.
key.
The word HOLD will appear in the top line of the display.
Continue to hold the key until the display automatically advances
to the first variable in the programming sequence.
ADJUST VARIABLE IN A PROGRAMMING SEQUENCE
QUICK PRESS
the
SS
key.
In most programming options, a
PRESS & HOLD
will cause the variable to fast advance, allowing you to quickly
advance to a different number.
PRESS &
CONTINUED NEXT PAGE
KEYS AND THEIR FUNCTIONS
ADVANCE TO NEXT VARIABLE IN A PROGRAMMING
SEQUENCE
QUICK PRESS
the
MODE
When you have chosen the variable you want for a particular
portion of a programming sequence
key to set and advance to the next variable.
EXIT A PROGRAMMING SEQUENCE
PRESS & HOLD
the
any time.
Once all variables of a programming sequence have been entered,
of the
SS
key
QUICK PRESS
the
MODE
and return to the initial main display.
ACTIVATE THE DISPLAY BACKLIGHT SYSTEM-
QUICK PRESS
key.
Activate the backlight system at any time with a
of the
EL/SET
EL/SET
EL/SET key. The backlight will remain active for a period of
QUICK PRESS
the
MODE
5 seconds. If, while the backlight is active, another key is pressed,
the timer will be reset and the 5-second period will start again.
This will happen for as long as keys are pressed. This allows you
to easily operate and program the watch in low light situations.
EL/SET
EL/SET
EL/SET key to exit the setting sequence at
key to exit the setting sequence at
NOTE: Excessive use of the backlight system will result in
shorter battery life.
key to exit the programming sequence
the
EL/SET
EL/SET key.
EL/SET
key.
QUICK PRESS
key. The backlight will remain active for a period of
10