DCS BFGC-30BS-L 매뉴얼 - 페이지 3
{카테고리_이름} DCS BFGC-30BS-L에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCS BFGC-30BS-L 13 페이지.
DCS BFGC-30BS-L에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)
![DCS BFGC-30BS-L 매뉴얼](/uploads/products/server2/1956888/1956888.jpg)
USING THE SIDE BURNER
LIGHTING INSTRUCTIONS
First remove the cover and any cooking utensils from the burner grate. Check to see if the burner cap is on cor-
rect. Push, turn and hold the control knob in at the "HI" position until the burner is lit or 4 seconds pass
(Fig. 55). If the burner doesn't ignite, wait 5 minutes for any accumulated gas to dissipate then try again. If the
burner will not light after several attempts, check the troubleshooting instructions on page 36.
MATCH LIGHTING
Hold a paper book match near the burner ports, turn the control knob counterclockwise to "HI". Rotate the knob
immediately once the burner is lit to the desired setting.
Note:
If you are using propane gas, a slight pop or flash may occur at the burner ports a few seconds after the burner has been
turned "off". This "extinction pop" is normal for propane gas.
Control
Knob
29
Fig. 55
EN