autoright C800896 매뉴얼 - 페이지 4

{카테고리_이름} autoright C800896에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. autoright C800896 16 페이지. Electric, 7 and 10 inch random orbital all-purpose buffer

페이지 인쇄

SERVICE

1. Tool service must be performed only by

qualified repair personnel. Service or

maintenance performed by unqualified

personnel may result in a risk of injury.

2. Accessories must be rated for at least the

speed recommended on the tool warning

label. Wheels and other accessories

running over rated speed can fly apart and

cause injury.

Important!: Do not operate the polisher until

you have inspected each part. If any part is

missing or damaged, do not use it. Return

the polisher to the place of purchase. See

WARRANTY.

READ AND FOLLOW ALL SAFEGUARDS

Like other power tools, buffers are safe

when properly used but can be dangerous

if misused. It is the responsibility of the user

to read and understand all instructions,

IMPORTANT SAFEGUARDS, and safety

precautions before operating the unit and to

use the unit properly. Failure to do so may

result in product damage, personal injury or

loss of life.

Do not try to repair (or disassemble) the

unit yourself. Repairs should be performed

by a qualified shop familiar with this unit

or returned to AutoRight (See warranty).

This unit is to be used with authorized parts

only. When using parts that do not comply

with the manufacturer's specifications and

safety devices, the user assumes all risks

and liabilities.

PROP 65 WARNING

Handling the coated electrical wires of this

product exposes you to lead, a chemical

known to the State of California to cause birth

defects or other reproductive harm. Wash

hands after use.

• Never leave buffer unattended.

• Never leave buffer plugged in while

cleaning.

ENGLISH

IMPORTANT SAFEGUARDS

SERVICING A DOUBLE-INSULATED PRODUCT

In a double-insulated product, two systems of

insulation are provided instead of grounding.

No grounding means is provided on a double-

insulated product, nor should a means of

grounding be added to the product. Servicing

of a double-insulated product requires extreme

care and knowledge of the system and should

only be done by qualified service personnel.

Replacement parts for a double-insulated

product must be identical to those parts in

the product.

EXTENSION CORDS

Make sure your extension cord is UL/ETL/CSA

listed and is in good condition. When using

an extension cord, be sure to use one heavy

enough for the current - for lengths less than

18 feet, use a No. 18 AWG. or heavier; for

lengths more than 18 feet, use No. 16 AWG. If

in doubt, use a heavier gauge. An undersized

cord will cause a drop in line voltage resulting

in loss of power and overheating.

STORAGE

Make sure unit is clean and dry before

storing. Store in a dry location. To prevent

damage, the electrical cord should not be

crimped during storage.