Gallagher TWR-5 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Gallagher TWR-5에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallagher TWR-5 16 페이지. Weigh scale unit
Gallagher TWR-5에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

Gallagher TWR-1 Weigh Scale Quick Start Guide

Installing the loadbars

If using loadbars, follow these steps:

Select a weighing site that provides a solid, level and well drained surface.

Ensure the loadbars and platform are well secured and clear of any

obstructions.

Either bolt the loadbars to the concrete pad or locate them on studs set into

the concrete. It is important that the loadbars and platform sit flat without

any rocking or twisting to avoid weighing inaccuracies.

Note: It may be necessary to shim the loadbars or platform to ensure there

are no twisting pressures within the platform. Weights should be evenly

distributed over the top of the weigh bars.

Connect the loadbar cables to the base of the TWR-1.

A beep will sound indicating a successful connection/ disconnection of the

loadbars.

WARNING – Do not weld the loadbars or any structure that they are

attached to. Loadbars contain sensitive electronic devices which will be

damaged by welding. Damage caused by welding will void warranty.

Position the TWR-1:

•

clear of the platform to ensure it does not interfere with the flow of

animals during the weighing cycle

•

within easy reach of the loadbar leads

•

within easy reach of the operator (for manual weighing)