Gallagher TWR-5 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Gallagher TWR-5에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallagher TWR-5 16 페이지. Weigh scale unit
Gallagher TWR-5에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄
Gallagher TWR-5 빠른 시작 매뉴얼
CONNECTING EQUIPMENT TO THE TWR-5
Connecting an EID Reader
•
The TWR-5 internal reader can be used with or without loadbars connected.
To use the internal reader, you must fi rst connect the antenna panel. Refer to
A aching the TWR-5 to the Antenna panel (p. 6)
•
A Hand-held EID Reader or permanent reader can be connected to the TWR-
by either a serial cable or via Bluetooth®.
1.
If using a hand-held reader or permanent reader, turn On the EID Reader.
2.
For all readers, turn On the TWR- .
3.
On the TWR- , tap
4.
Select how the Reader is being connected. This will be by Bluetooth, Serial
cable or using the internal reader (Panel).
If using the internal reader, a successful connec on will show as
footer bar.
Note: A mini serial adapter is included with the TWR- if a female serial
connec on is required.
Important: The TWR- can also be connected to via Bluetooth as a "Slave",
by ini a ng the connec on from the reader. A pass-code of "0000" may be
required to complete this connec on.
Refer to Bluetooth – Connect EID Reader in the TWR-5 On-screen Help or your EID
Reader User Manual for further informa on on pairing the reader.
Connecting to a Drafter/Sorter
To connect the TWR- to a dra er, use the data cables supplied with your dra er.
Refer to your Dra er User Manual for more informa on.
1.
Turn On the TWR- .
2.
On the TWR- , tap
3.
Specify the type of dra er that is being connected, to complete the setup.
If your dra er is not listed, tap
wizard set up your dra er.
8
Gallagher TWR- Weigh Scale Quick Start Guide
Se ngs
> Equipment Connec ons > EID Reader
Se ngs
> Equipment Connec ons > Dra er
Create Custom
and follow the confi gura on
.
in the
.