Gallagher T12 설치 참고 사항

{카테고리_이름} Gallagher T12에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallagher T12 11 페이지.
Gallagher T12에 대해서도 마찬가지입니다: 설치 참고 사항 (13 페이지), 매뉴얼 (12 페이지)

페이지 인쇄
Gallagher T12 설치 참고 사항
Installation Note
Gallagher T12 Reader
This equipment contains components that can be damaged by electrostatic
discharge. Ensure both you and the equipment are earthed before beginning
any servicing.
The Gallagher T12 Reader
The Gallagher T12 Reader is a smart card proximity reader. It can be installed as
either an entry reader or exit reader. It can be mounted on any standard British
electrical flush box.
The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic cards. The
Multi Tech variant can also read 125Khz cards.
The reader sends information to the Cardax FT Controller and acts upon information
sent from the Cardax FT Controller. The reader itself does not make any access
decisions.
The Gallagher T12 Reader uses the "Cardax IV Reader" communications protocol
to communicate with the Cardax FT Controller.
Installation Note | Gallagher T12 Reader
Part Number: 3E2512 R1 | 1