Gallagher T15 PIV Mifare Reader Black 설치 참고 사항 - 페이지 7

{카테고리_이름} Gallagher T15 PIV Mifare Reader Black에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallagher T15 PIV Mifare Reader Black 13 페이지.

Notes:

•

Shielded cable may reduce the obtainable cable length. Shielded cable should be

grounded at the Controller end only.

•

If other cable types are used, operating distances and performance may be reduced

depending on the cable quality.

•

HBUS allows up to 20 readers to be connected to a single cable. Each reader requires at

least 9 Vdc to function correctly. The cable length and the number of readers connected

will have an impact on the voltage at each reader.

Distance between proximity readers

The distance separating any two proximity readers must not be less than 200 mm (8 in) in all directions.

200 mm

When mounting a proximity reader on an internal wall, check that any reader fixed to the other side of

the wall is not less than 200 mm (8 inches) away.

3E4237 Gallagher T15 Reader | Edition 1 | June 2016

Page 7