DCS CTD-365 사용 및 관리 매뉴얼 - 페이지 8

{카테고리_이름} DCS CTD-365에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCS CTD-365 17 페이지. Professional drop-in cooktops, 36” – 5 burner cooktop, 30” – 4 burner cooktop
DCS CTD-365에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

COOKTOP USE

CAUTION:

For warranty coverage, DCS requires that burner adjustments be made by a qualified technician at the time of instal-

lation. Extreme care should be used when adjustments are made after installation.

CONTROL KNOBS:

The control knobs and knob bezels are readily associated with the burners they control and are located on the

right hand side of the Cooktop. The sealed top burners have an infinite number of heat settings and there are no

fixed positions on the control knobs between HI and SIM (with the exception of LOW ). To light the burner push

control knob in and rotate counterclockwise. An audible clicking sound will be heard and the burner should light

immediately. To use, turn the knob to the desired setting.

COOKING UTENSILS:

For best results we recommend using Professional Cookware. These

can be found at your finer department stores, specialty cooking

shops, or restaurant supply stores. If using regular cookware be

very careful if the pans have plastic handles, as these large profes-

sional size burners can flame up on the outside of the pan and

melt or bubble the handles.

BURNERS:

Your new Drop-In Cooktop is equipped with burners

typical of those used in restaurants. These restaurant

style burners are comprised of high strength die cast

aluminum burner bases and simmer port rings,

precision forged brass port rings, and cast iron

burner caps.

Model CTD-365 cooktop is equipped with 4 burners

rated at 11,000 Btu/hr, and one high-output burner

rated at 17,500 Btu/hr. Model CTD-304 is equipped

with 2 burners rated at 11,000 Btu/hr, 1 burner rated

at 10,000 and 1 high-output burner rated at 15,500

Btu/hr (for natural gas). All Drop-In Cooktop burners

have exceptionally low simmer capabilities (See chart

on page 7). The burner system is designed for

maximum cleanability and control. All the cooktop

burners have electronic spark re-ignition to eliminate

continuously burning pilot; if the flame is blown out,

it will relight.

INDICATOR LIGHT

THESE GRAPHICS

SHOW BURNER

LOCATION:

RIGHT FRONT

BURNER

Brass Ring

Locating Pin

Locating

Notch

Electrode

Locating Pin

Hole Inside

TOP VIEW OF KNOB BEZEL

"ON"

Locating Pin

Hex Nut

Locating Pin

Cap

Main Burner

Port Ring

Simmer Ring

Burner Base

Venturi