Galleon SignalClock Series 설치 및 사용자 설명서 - 페이지 10
{카테고리_이름} Galleon SignalClock Series에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galleon SignalClock Series 19 페이지.
페이지 인쇄TIME SERVER ADDRESS
The Time Server Address page allows you to point the clock to a time server for time updates.
Currently this only accepts an IP address.
You should ensure the time server you are pointing the clock to is synchronised. The clock may
reject time from an unsynchronised source.
Once you have entered a time server address, click the Apply Changes button. A restart is not
required for changes on this page to take effect.
Public Time Servers
If you are pointing the clock to a public time server, you should be aware that these servers
usually use rate limiting to prevent Denial of Service (DoS) attacks and misuse. Pointing multiple
clocks to, or having multiple NTP requests to, a public time server can often lead to a ban by the
public time server. In this case, the clock(s) will indicate they have lost connection to the time
server by flashing 'No Sync' every 60 seconds.
To prevent your devices from being banned by the public time server, you can download and
install our TimeSync software on a non-domain controller system. Point TimeSync to the public
time server and point your clock(s) and any other devices to TimeSync. This minimises the chance
of being banned by the public time server. You should contact Galleon Systems for more
information, and you will need to purchase licenses before using TimeSync.
www.galsys.co.uk
galleonsupport.com
SIGNALCLOCK V2 Manual
10
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477