Galleon SignalClock Series 설치 및 사용자 설명서 - 페이지 13
{카테고리_이름} Galleon SignalClock Series에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galleon SignalClock Series 19 페이지.
페이지 인쇄DAYLIGHT SAVING TIME
By default, the clock will not have daylight saving time (DST) enabled. You will need to enter the
DST settings for your time zone manually.
To enable DST, select 'Enable DST' and enter the settings required.
These settings determine when DST starts and ends. When DST starts, the clock will go forward
one hour and return to normal time once DST ends.
Note: The DST end time does not take daylight saving into account. For example, setting 1.00
here means the time would revert at 2.00
Example Configuration:
In the UK, DST begins on the last Sunday in March at 2.00
October at 2.00
AM
Start: 3 (March), 5 (5
End: 10 (October), 5 (5
www.galsys.co.uk
galleonsupport.com
SIGNALCLOCK V2 Manual
AM
. Therefore, the settings would be:
th
Sunday), 0 (Sunday), 2, 0
th
Sunday), 0 (Sunday), 1, 0
with daylight saving.
and ends on the last Sunday of
AM
13
AM
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477