GALLERY 36 사용 설명서 - 페이지 8

{카테고리_이름} GALLERY 36에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GALLERY 36 18 페이지. Canvas stretching machine

Note:
When the operator removes their foot from the pedal the clamping bar will "clamp" the
canvas. The operator would then move the wood stretcher frame forward and off of the
stretcher plates, it should now be resting on the angle bar in front of the plates. This
position is referred to as the "un-loaded" position. In this position the stretcher bar
should extend approximately ½" over the front of the angle bar. In summary the plates
should be behind the angle bar and in front of the bar by approximately ½" in either the
"unloaded" or the "loaded" positions.

Basic Operation

Video:
http://www.youtube.com/watch?v=w5000LVd9tc
1. Lay the artwork "facedown" on a clean work surface behind the machine. Fold the
canvas along the image so that approximately 1/16" of the image is extending over
the radius.
This is referred to as the "Un-loaded Position"
8