Copernicus iRover2 IFP300 조립 설명서 - 페이지 16
{카테고리_이름} Copernicus iRover2 IFP300에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Copernicus iRover2 IFP300 16 페이지. Interactive flat panel easel
Copernicus iRover2 IFP300에 대해서도 마찬가지입니다: 조립 설명서 (17 페이지), 조립 설명서 (16 페이지)
페이지 인쇄
Care & Maintenance
How to care for your iRover For Interactive Flat Panel Cart
2
iRover for Interactive Flat Panels is made for indoor use only.
Cleaning: for the cart only, wipe with dry or damp cloth and use mild soap only if necessary.
Perform bushing lubrication every 6 months. See instructions below.
For care of the flat panel please refer to the manufacturer's instructions.
Tighten all casters using supplied Caster Wrench.
Keep wrench with unit. Casters must be tightened every 6 months for proper maintenance.
Bushing Lubrication Instructions
1) Raise the board to its highest position.
2) Apply a generous bead of Petroleum Jelly all around the
top of each bushing, pressing some in the gap between
the frame and bushing. There are two (2) bushings in
total.
3) Lower the unit back down to its lowest position.
Further Resources
For more information on your iRover & its proper use & maintenance, please visit our website at
www.copernicused.com or call us at 1-800-267-8494.
Check out some of our
other great products!
16
2
2
www.copernicused.com
IFP300 - Version B - Released August 23, 2016 - Copernicus Educational Products Inc.
Need Support?
Have a Question?
Email our Customer Support