Copernicus iRover2 IFP300 조립 설명서 - 페이지 16
{카테고리_이름} Copernicus iRover2 IFP300에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Copernicus iRover2 IFP300 17 페이지. Interactive flat panel easel
Copernicus iRover2 IFP300에 대해서도 마찬가지입니다: 조립 설명서 (16 페이지), 조립 설명서 (16 페이지)
페이지 인쇄
Actual Size:
15
You will need: (Not to Scale)
Final Assembly Checks
Check entire assembly for loose parts; tighten all casters, bolts, screws and nuts
Tips for Use
General Tips
2
To hold iRover steady when in use/storage: lock the casters.
Raising & Lowering Your Flat Panel
To adjust the height of the flat panel:
- connect the Electric Lift (see assembly Step 11)
- plug in the power strip and turn it on
- use buttons on remote to raise and lower flat panel
16
Screwdriver
+
Phillips #2 or #3
Tighten all casters using
supplied Caster Wrench.
Keep wrench with unit.
Casters must be tightened
every 6 months for proper
maintenance.
IFP500 - Version 2020 A - Released February 21, 2020 - Copernicus Educational Products Inc.
Adjustable wrench (2x)
OR
7/16" Wrench (2x)
9/16" Wrench (2x)
+
Caster Wrench
1x