HIGHLEAD GC2268-2BXL 사용 설명서 - 페이지 3

{카테고리_이름} HIGHLEAD GC2268-2BXL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIGHLEAD GC2268-2BXL 11 페이지. Two needle cylindrical bed compound feed lockstitch sewing machine (rotary)

페이지 인쇄

一、PRECAUTIONS BEFORE STARTING OPERATION

1. Safety precautions

1） When turning the power on, keep your hands and fingers away from the area around/under the needle

and the area around the pulley.

2）Power must be turned off when the machine is not in use, or when the operator leaves the seat.

3）Power must be turned off when tilting the machine head, installing or removing the "V" belt,

adjusting the machine, or when replacing.

4）Avoid placing fingers, hairs, bars etc., near the pulley, "V" belt, bobbin winder pulley, or motor when

the machine is in operation.

5）Do not insert fingers into the thread take-up cover, under/around the needle, or pulley when the

machine is in operation.

2. Precautions before starting operation

1）Do not operate the machine before lubricating it.

2）When a new sewing machine is first turned on, verify the rotational direction of the pulley with the

power on（the pulley should rotate counterclockwise when viewed from pulley）.

3）Verify the voltage and (single or three) phase with those given on the machine nameplate.

3. Precautions for operating conditions

1） Avoid using the machine at abnormally high temperatures （ 35℃ or higher） or low temperatures （ 5℃

or lower）.

2）Avoid using the machine in dusty conditions.

二、SPECIFICATIONS

Max. sewing speed

Stitch length

Needle

Needle bar stroke

Thread take-up lever stroke

Presser foot stroke

Alternating movement

Bed size In dia / Length

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

Lubrication

Needle gauge

— 1 —

1200 rpm

6 mm

DP×17 23#

36 mm

74.5 mm

By Hand 8 mm / By Knee 13 mm

2-5 mm

88.5 mm / 930 mm

Manual

12.7mm