DCS Vent Hood ES36 설치 매뉴얼 - 페이지 12

{카테고리_이름} DCS Vent Hood ES36에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCS Vent Hood ES36 20 페이지. The professional and euro vent hood
DCS Vent Hood ES36에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (13 페이지)

페이지 인쇄

1. Parts

INSTALLATION

4. Find studs behind the drywall by tapping the wall or using a stud finder. Locate one stud on either

side of the cooktop centerline to use for mounting the wooden bracket as shown in Figure 4.

5. Align the top of the wood bracket along the horizontal line drawn in step 1. Align the centerlines

of the bracket and cooktop.

6. Drill a 3" deep 1/8" hole through the wooden bracket, drywall and into the stud.

7. Use 2 to 4, 1/4" x 3" flat head wood screws to attach the bracket to the wall as shown in Figure 4.

For support of longer hoods, use three or four studs as available. Countersink the heads to prevent

interference with the hood.

8. On the wood bracket, mark the locations used to hang the hood according to Figure 5 and its Table.

HOOD MODEL

VS Series

ES Series

HOOD MODEL

VS Series

ES Series

DIM. "E"

15-1/2"

10-3/8"

DIM. "F"

7-5/8"

7-9/16"

DRYWALL

COOKTOP

CENTERLINE

HEIGHT ABOVE

COOKTOP

SCREWS

(2 ea. 1/4" x 3")

FIG. 4

TO COOKTOP

SURFACE

COOKTOP

DRYWALL

CENTERLINE

SCREWS

(2 ea. 4.2 x 18)

DIM "F"

FIG. 5

STUDS

DESIRED COOKTOP

HEIGHT + "E"