Dynaudio BM5 mkIII 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Dynaudio BM5 mkIII에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynaudio BM5 mkIII 9 페이지. Active monitor system
Dynaudio BM5 mkIII에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 사용자 설명서 (16 페이지)
페이지 인쇄
Technical specifications
Technical specifications
Input level for 85 dB SPL @ 1 m, @ 0 dB setting,
unbalanced
Max input level (@setting)
Power consumption
Amplifier power
Max SPL 1 m, normal room, short term IEC signal
Frequency Response (+/- 3 dB)
Resonance Frequency
Internal Cabinet Volume
Bass Principle
Weight
Dimensions (Depth x Width x Height)
Crossover
Crossover Frequency
Crossover Slope
Connection
Recommended Placing
Remarks
Tweeter
Woofer
Cabinet
Crossover
Amplifier
Due to continuous development, these specifications are subject to change without notice.
12
80 mVrms
4,8 Vrms (-10 dB)
1,5 Vrms (0 dB)
1 Vrms (+4 dB)
Standby: 0.3 W
Idle: 5.8 W
Max: 94 W
Tweeter: 50 W
Woofer: 50 W
118 dB peak
42 Hz to 24 kHz
45 Hz
9.5 liters
Bass reflex
7.7 kg
296 x 186 x 320 mm
2 way
1900 Hz
12 dB/oct
XLR balanced and RCA unbalanced
Desktop
D-281 – 28 mm soft dome, rear chamber, magnetic fluid
4 mm aluminum front
Pure aluminum wire voice coil
180 mm molded aluminum frame
One piece thermo formed MSP cone
75 mm voice coil with pure aluminum wire on aluminum
former.
Designed to be placed on a desk.
18 mm MDF
Active, DSP based
Input sensitivity selector
HF, MF and LF trim selector
High pass frequency selector
Auto standby/On selector
Optional remote volume control (cabled)
High efficiency digital power amplifiers.
Switch mode power supply with wide range input
Notes
BM5 mkIII
Owner's manual
Notes
13