Dynaudio Contour 소유자 매뉴얼 - 페이지 12
{카테고리_이름} Dynaudio Contour에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynaudio Contour 17 페이지.
Dynaudio Contour에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (17 페이지)
페이지 인쇄
Dynaudio Contour
5
1
30°
3
90°
150°
4
Fig. 6
5.1 and 7.1 multi-channel speaker set-up.
Multi-channel
Dynaudio loudspeakers are designed to offer the most
advanced performance in both stereo and multi-channel
set-up
applications. When connecting a loudspeaker to a
multi-channel set-up, in general the same guidelines
as mentioned in the previous section will apply.
22
2
1
0°
30°
3
90°
150°
4
Loudspeakers for multi-
Depending on the desired surround
channel set-ups
format 5.1 or 7.1, you need to install
additional speakers:
For a multi-channel set-up, in addition
►
to the two main (stereo) loudspeakers,
5.1: The standard multi-channel set-
additional channels (speakers) may
up with two side/surround speakers,
be added to reproduce dialogue and
preferably placed at the sides or
surround effects. With the centre
slightly behind the listening position
►
channel and compact models, it is
7.1: Two rear speakers are added
possible to achieve the same high level
directly behind the listening position,
of performance and sound on every
typically on the back wall
channel.
Subwoofer
Centre speaker
Most often a subwoofer will be utilized
The centre is responsible for the
for the LFE signal, especially in larger
information directed from the middle of
listening rooms. The optimal position of
the screen and should be positioned
the subwoofer depends on the size of
between the right and left main
the room and its acoustics. Please refer
loudspeakers. In a home theatre/
to the Subwoofer manual.
surround set-up, the centre supports the
images and should be placed close to
the screen.
Side/Rear speakers
Note
The side/rear speakers are responsible
When setting up a home theatre system, the loudspeakers should create a realistic
for the sound effects behind the listening
soundstage with similar sound characteristics on each channel. It is therefore
position. When using the compact
important that all speakers should match the same quality level. This is especially
models as side/rear speakers, the
important with regards to the centre channel loudspeaker, as this is a critical aspect
speakers can be placed onto a shelf,
of any multi-channel soundstage. Dynaudio has developed various models suitable for
mounted at the side/rear wall or placed
multi-channel applications: Compact and floor standing models with a matching centre
on a stand. This allows for a wide variety
channel, all optimised for use with Dynaudio active subwoofers and Dynaudio optional
of placements, even if your listening
accessory products.
room and furniture limit an optimal set-up.
Multi-channel set-up
Multi-channel loudspeaker
set-up
A complete multi-channel set-up
consists of the following speakers:
1 Front (stereo) speakers
2 Centre speaker
3 Side/Surround speakers
4 Rear speakers (as explained above)
5 Subwoofer (possible position)
As there are many different set-up
options (from 5.1 to 10.2 channel
applications) and loudspeaker
positioning will also depend on a room's
shape, please consult your Dynaudio
dealer for special applications and
placement options.
23