Dynaudio Focus 30 XD 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Dynaudio Focus 30 XD에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynaudio Focus 30 XD 15 페이지.
Dynaudio Focus 30 XD에 대해서도 마찬가지입니다: 최초 설정 (2 페이지)

Owner's Manual Focus XD

Connections

This section describes the connections and control elements

for the components. Please contact your Dynaudio distributor

and control

if you have any problems with connection and start-up.

elements

Distributor addresses can be found on the Internet at

dynaudio.com. The active loudspeakers have an integrated

amplifier and can be controlled with the remote control.

dynaudio.com/focusxd

CONNECTIONS AND CONTROL ELEMENTS

Digital connection. IN = input, OUT = output

Digital Audio

Analog Audio

Analog connection. IN = input, Input sensitivity = manual correction of the input sensitivity (+6 / 0 / -6 dB)

Service

USB port for firmware update

Speaker Position

Sound adjustment (depending on the position of the loudspeakers). Sound adjustment is performed with a

rotary knob with 7 positions. With the 3 main positions, the rotary knob clicks into place:

Neutral = with free-standing placement. Wall = if placed near a wall. Corner = if placed in a corner

Treble

Treble adjustment (+1 / 0 / -1 dB)

Zone

Selecting the audio zone (Xeo hub operation)

Loudspeakers assigned to different zones can be controlled separately via the remote control.

The zones are identified as Red, Green, and Blue.

Channel Mode

Master = loudspeaker operated as master. Slave = loudspeaker operated as slave.

External = loudspeaker configured as active loudspeaker (at full performance)

Power

Power switch. I = The loudspeaker is on. The loudspeaker can be activated and deactivated via the remote

control. If the loudspeaker is activated and there is no signal, it will switch to standby mode.

O = The loudspeaker is completely off.

Mains socket. To connect the loudspeaker to the mains voltage.

Connection and control elements