HighPoint R1101 Series 빠른 설치 매뉴얼 - 페이지 7

{카테고리_이름} HighPoint R1101 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint R1101 Series 8 페이지. 4x m.2 port to pcie 3.0x16 nvme raid controller

페이지 인쇄

Step 7. After installing the SSDs, reattach the aluminum casing to the

R1101.

Step 8. On the rear of the R1101, refasten the 6 screws that were

removed in step 1.

Note:

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the

thermal pad, before refastening it to the R1101. If the cover is

improperly installed, the fan and thermal pad will be unable to

sufficiently cool the NVMe SSD's and controller componentry,

which may result in damage to the SSD's or controller hardware,

performance loss, unstable I/O, and the loss of data.