HighPoint R1104F 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} HighPoint R1104F에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint R1104F 9 페이지. 4x m.2 port to pcie 3.0x16 nvme hba

R1104F Hardware Installation

Step 1. On the rear of the R1104F, remove the six screws that secure the

unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove the heat sink from

the R1104F.

Step 3. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent

the thermal pad form conducting the heat away from the NVMe

SSDs if not removed.