HighPoint R1104F 빠른 설치 매뉴얼 - 페이지 7

{카테고리_이름} HighPoint R1104F에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint R1104F 9 페이지. 4x m.2 port to pcie 3.0x16 nvme hba

Step 9. On the rear of the R1104F, refasten the six screws that were

removed in Step 1.

Note1:

Make sure the aluminum cover is properly aligned with the HBA

board (PCB), and that it makes full contact with the thermal pad, before

refastening it to the R1104F. If the cover is improperly installed, the fan

and thermal pad will be unable to sufficiently cool the NVMe SSDs and

HBA componentry, which may result in damage to the SSDs or HBA

hardware, performance loss, unstable I/O, and the loss of data.

Note2:

Please be sure to connect NVMe SSDs before using the NVMe

HBA to reduce the occurrence of unnecessary errors!