HighPoint R1204 빠른 설치 매뉴얼 - 페이지 8
{카테고리_이름} HighPoint R1204에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint R1204 9 페이지. 4x m.2 port to pcie 3.0 x8/x16 nvme hba's
HighPoint R1204에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (9 페이지)
페이지 인쇄
Step 7. Replace the heat sink after installing all SSDs
Step 8. On the rear of the R1104/R1204, refasten the six screws that
were removed in step 1.
Note:
Make sure the heatsink is properly aligned with the
controller board (PCB), and that it makes full contact with the
thermal pad, before refastening it to the NVMe HBA. If the
heatsink is improperly installed, it will be unable to sufficiently
cool the NVMe SSD's and controller componentry, which may
result in damage to the SSD's or controller hardware,
performance loss, unstable I/O, and the loss of data.
8