HighPoint R1504 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} HighPoint R1504에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint R1504 7 페이지. 4x m.2 port to pcie 4.0 x16 nvme hba
HighPoint R1504에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (7 페이지)

페이지 인쇄

The following example shows four PCIe Gen4 NVMe SSD installed

into Port 1, 2, 3 & 4.

Step 8. Reattach the heat sink after installing all of the NVMe SSDs.

Step 9. On the rear of the R1504, refasten the 6 screws that were

removed in step 1.

Note:

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the

thermal pad, before refastening it to the R1504. If the cover is

improperly installed, the fan and thermal pad will be unable to

sufficiently cool the NVMe SSDs and controller componentry, which

may result in damage to the NVMe SSDs or controller hardware,

performance loss, unstable I/O, and the loss of data.

Port1

Port2

Port3

Port4