HighPoint Rocket 1108A 빠른 설치 매뉴얼 - 페이지 7

{카테고리_이름} HighPoint Rocket 1108A에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint Rocket 1108A 11 페이지. 8x m.2 port to pcie 3.0 x16 nvme hba

Step 8. After installing all SSDs, carefully flip the heatsink to the right.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.

Step 10. On the rear of the R1108A, refasten the 6 screws that were

removed in step 1.

Note:

Make sure the aluminum cover is properly aligned with the

HBA board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the R1108A. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently

cool the NVMe SSDs and HBA componentry, which may result in

damage to the SSDs or HBA hardware, performance loss,

unstable I/O, and the loss of data.