HighPoint Rocket 1504 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} HighPoint Rocket 1504에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint Rocket 1504 7 페이지. 4x m.2 port to pcie 4.0 x16 nvme hba
HighPoint Rocket 1504에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (7 페이지)
페이지 인쇄
R1504 Hardware Installation:
Step 1. On the rear of the R1504, remove the six screws that secure the
unit's heat sink to the PCB.
Step 2. After removing the screws, carefully remove the heat sink from
the R1504.
Step 3. After removing the casing, carefully turn it over to view the
thermal pad. The blue film must be removed from the pad before
reinstalling the panel. This film protects the pad from damage and
foreign objects prior to installation, however, it can also prevent
the thermal pad form conducting the heat away from the NVMe
SSDs if not remove.
4