HighPoint Rocket 1504 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} HighPoint Rocket 1504에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint Rocket 1504 7 페이지. 4x m.2 port to pcie 4.0 x16 nvme hba
HighPoint Rocket 1504에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (7 페이지)

페이지 인쇄

The following example shows four PCIe Gen4 SSD installed into Port

1, 2, 3 & 4;

Step 7. Reattach the heat sink after installing all of the SSDs.

Step 8. On the rear of the R1504, refasten the 6 screws that were

removed in step 1.

Note

Make sure the aluminum cover is properly aligned with the

：

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the R1504. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD's and controller componentry, which may result in damage

to the SSD's or controller hardware, performance loss, unstable I/O,

and the loss of data.

Port1

Port2

Port3

Port4