HighPoint Rocket Series 빠른 설치 매뉴얼 - 페이지 3

{카테고리_이름} HighPoint Rocket Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint Rocket Series 6 페이지. Replacing the thermal silicone

Replace the thermal silicone

The following procedure uses the SSD7540 for reference.

Step 1 On the rear of the SSD7540, remove the six screws that secure

the unit's heat sink to the PCB.

Step 2 Inner side of heat sink: Starting from the bottom left-hand

corner, gently but firmly lift the edge of the silicone sheet and

pull it away from the surface of the heat sink. Repeat for the

second silicone pad.