HighPoint RocketRAID 600L 빠른 설치 매뉴얼 - 페이지 5
{카테고리_이름} HighPoint RocketRAID 600L에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketRAID 600L 9 페이지. 6gb/s sata pci-express 2.0 raid hba
HighPoint RocketRAID 600L에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (8 페이지)
페이지 인쇄Connector and Jumper description
Connector
A1
F1
J1
Beep 1
Port
Connector
Active/FAIL LED PIN connector:
A 1-Pin connection from the HBA to an LED on the chassis. For detailed
LED connection requirements and display information, please refer to the
FAQ:
http://www.highpoint-
tech.com/websupport/kb_view_article_noauth.php?id=32
Hardware Installation
Installing the RocketRAID 600L Series HBA
Note: Make sure the system is powered-off before installing the
RocketRAID 600L Series HBA.
1.
Open the system chassis and locate an unused PCI-E (2.0/1.0) (x4,
x8, x16) slot or (3.0) (x16) slot.
2.
Remove the PCI slot cover.
3.
Gently insert the RocketRAID 600L HBA into the PCI-E slot, and
secure the bracket to the system chassis.
4.
After installing the adapter, attach the hard disks or disk enclosure to
the RocketRAID 600L HBA using the appropriate cables (SATA or Mini-
SAS).
5.
Close and secure the system chassis.
RocketRAID
640L
Active LED PIN
Fail LED PIN
I2C Connector
SATA
RocketRAID
642L
Alarm Buzzer
SATA and
eSATA
5
RocketRAID
644L
N/A
N/A
N/A
eSATA
RocketRAID
644LS
Mini-SAS