HighPoint RR3720 설치 매뉴얼 - 페이지 11

{카테고리_이름} HighPoint RR3720에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RR3720 15 페이지. Pci-express 3.0 x8 raid controller
HighPoint RR3720에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (15 페이지)

페이지 인쇄

Linux CentOS on RR3740/3720/2840/840/3742/710/720 Installation Guide

sh rr37xx_8xx_28xx_linux_x86_64_src_vxx.x.x_xx_xx_xx.bin or

./ rr37xx_8xx_28xx_linux_x86_64_src_vxx.x.x_xx_xx_xx.bin

k. Follow the prompts to complete the driver installation.

After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/rr3740a /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/rr3740a /x

This command will show the driver version number, physical device list and logical device

list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to RR Series RAID controller. Installation of the

management software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

- 9 -