HighPoint SSD7103 설치 매뉴얼 - 페이지 9

{카테고리_이름} HighPoint SSD7103에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint SSD7103 11 페이지. Linux ubuntu desktop 19.10
HighPoint SSD7103에 대해서도 마찬가지입니다: 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (15 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (11 페이지), 빠른 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (12 페이지)

SSD7103 Linux CentOS7.7 Installation Guide

Open source driver needs to be installed after system installation.

http://highpoint-tech.com/USA_new/series-ssd7103-download.htm

Run the .bin file to install the driver package.

# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin

k. Follow the prompts to complete the driver installation.

After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to

software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

When the system updates the kernel packages, the driver module hptnvme.ko should be

built and installed manually before reboot.

Please refer to the REAME file distributed with HighPoint

on how to build and install the driver module.

SSD7103

controller. Installation of the management

open source package

SSD7103

- 7 -