HighPoint SSD7110 설치 매뉴얼 - 페이지 7

{카테고리_이름} HighPoint SSD7110에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint SSD7110 8 페이지. Macos installation
HighPoint SSD7110에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지), 설치 방법 (6 페이지)

페이지 인쇄

SSD7110 Controller macOS Installation Guide

4. Open 'Carbon Copy Cloner',

select RAID disk that you created in the EFI interface, then click 'Clone';

5. When cloning has finished, restart your Mac, then press and hold the Option (Alt) key immediately;

6. Release the Option key when you see the Startup Manager window;

7. Select RAID0 disk, then click the arrow under its icon, or press Return.

3. Troubleshooting

If you can't select your startup disk or start up from it

Check for a valid operating system on the startup disk

Make sure that your RAID disk is using a version of macOS that is compatible with your Mac. You might need

to reinstall macOS on that disk.

Check startup security settings (Refer to Step 3)

If you're using a Mac that has the Apple T2 Security Chip, check the settings in Startup Security Utility.

Check for Option ROM firmware

If you're in Startup Manager and can't see a third-party startup disk.

a. Make sure your 'Firmware password protection is off'.

SOURCE = select the disk that you want to clone, DESTINATION =

7/8