Dynavin DVN CAB E 설치 지침 - 페이지 3

{카테고리_이름} Dynavin DVN CAB E에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynavin DVN CAB E 4 페이지. Cable set

CAN bus distributor for SLK vehicles

Remove the side panel on the left in the driver's footwell (2x T20/T25 Torx). One screw is located

in the middle, the other at the top of the edge. Carefully remove the plastic cap over the screw in

the middle with a screwdriver or pocket knife. Pull out side panel to the left and down: It's snagged

on other parts.

Pull the carpet upwards and open the cover of the black plastic channel underneath by unhooking

it. The lid is held in place by plastic hooks (marked).

The CAN bus distributors are located in the channel. Pull the marked distributor upwards out of its

socket.