DCU Tecnologic 70100010 설치 매뉴얼 - 페이지 6
{카테고리_이름} DCU Tecnologic 70100010에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCU Tecnologic 70100010 12 페이지.
페이지 인쇄ENG
1. Technical Parameter
Max VESA: 400×400 ; Maximum load:40kgs.
2. Parts List
Please check the parts in the package in comparison with the following list, make sure all of the parts
are in the package. Never use defective parts, never replace part with different specification.
QM7x80 Self-Tap Screw (4)
(E)12mm Plastic Sleeve (4)
(I)M6 Nut (4)
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
STEP1
(B)10x60 Plastic Anchor (4)
(F)M6x25 screws(4)
(J)10mm Outside Wrench (1)
B
WALL
(C)Φ8x16 Flat washer (8)
(G)M8x25 screws(4)
J
Step 1:
Use the wall plate as a template to drill
four holes of dia. 10mm and 80mm
depth in the wall. Then wedge four plastic
anchors into the holes.
(D)Φ6x12 Flat washer (4)
(H)M6x12 screws(4)