Copper Chef YJ-803A 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Copper Chef YJ-803A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Copper Chef YJ-803A 16 페이지. Power airfryer
페이지 인쇄
Instructions for Use
Before First Use
Remove all the packaging material.
•
Remove any stickers or labels from the Unit.
•
Before initial use, wipe the inside and
•
outside of the Unit with a warm, moist cloth
and mild detergent. Handwash all cooking
accessories.
Before cooking food, preheat the Copper
•
Chef Power AirFryer for a few minutes to
allow the Unit to burn off the manufacturer's
protective coating of oil. Wipe the Unit with
warm, soapy water and a washcloth after
this burn-in cycle.
Place the Unit on a stable, horizontal,
•
and level surface. Do not place the Unit
Using the Copper Chef Power AirFryer
1. Plug the Unit into a grounded wall socket.
2. To preheat, push the Power Button.
3. Press the Temperature Increase or Decrease
Buttons to set the cooking temperature.
4. Press the Time Decrease Button to set the
preheat time to 3 mins. When the preheat
cycle finishes, carefully pull the Outer Basket
out of the Unit and place the ingredients
inside. NOTE: Never use the Outer Basket
without the Fry Tray.
5. Do not touch the Outer Basket directly
because the Outer Basket becomes very hot
during operation. Only hold the Outer Basket
by its handle.
6. Press the Power Button. Set the appropriate
10
2-Qt. Copper Chef Power AirFryer | Model: AF002
on a surface that is not heat resistant.
Ensure that the Unit is used in an area
with good air circulation and away from
hot surfaces and any combustible materials.
Do not place on the stove top.
Place the Fry Tray in the Outer Basket. Slide
•
the Outer Basket into the Unit. If the Basket
is placed properly, it will click into place.
The Copper Chef Power AirFryer cooks
•
using hot air. Do not fill the Outer Basket
with oil or frying fat.
Do not put anything on top of the Unit.
•
This disrupts the airflow and affects the
cooking results.
time and temperature for the ingredients you
are cooking.
7. When the timer beeps five times, the set
cooking time has elapsed. Pull the Outer
Basket out of the Unit and place it on a
heat-resistant surface.
8. If the food is fully cooked, use tongs to
remove food. CAUTION: Do not turn the
Outer Basket upside down because any
excess oil that has collected on the bottom
of the basket will leak onto the ingredients.
9. If the food is not fully cooked, simply slide
the Outer Basket back into the Unit
and add a few minutes to the cooking time.
10. The Unit is instantly ready for preparing
another batch.