DYNAVOICE CL-14A 사용자 설명서 - 페이지 8

{카테고리_이름} DYNAVOICE CL-14A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNAVOICE CL-14A 12 페이지.

Play music via USB storage

Insert the USB storage with playable music files* in to the USB input jack (11), the CL-14A/CL-15A will

automatically start playing music. If a different source is selected, press the "MODE" button (1) until

the purple LED light comes on.

Please note that if no USB storage is plugged in to the USB input jack (11) or if no songs are playable,

the USB audio source cannot be selected.

*Playable music formats are: MP3, WMA, WAV, FLAC and APE (FLAC and APE only identifiable with

a sample rate no higher than 16 bits).

CAUTION!! Make sure that the volume is turned down on the CL-14A / CL-15A and the connecting

unit before you connect them, disregarding this advice may permanently damage the product.

Use the included 3.5mm audio cable to connect an external device to the AUX input jack (10). Press

the "MODE" button (1) until the LED indicator (7) turns red confirming AUX has been selected as

sound source.

To adjust the volume press the "VOL-" (5) or "VOL+" (6) button. To quickly adjust the volume, hold

down the respective button.

Each press on the volume button will get a single flash confirmation from the LED indicator (7).

When the volume reaches minimum or maximum, the LED indicator will flash 2 times to indicate

an invalid operation.