DYNAVOICE MAGIC FX-4 사용자 설명서 - 페이지 6
{카테고리_이름} DYNAVOICE MAGIC FX-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNAVOICE MAGIC FX-4 12 페이지.
DYNAVOICE MAGIC FX-4에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)
페이지 인쇄
3. Connecting the Subwoofer
There are several ways to connect the subwoofer to the amplifier, here are three
options. The level of the bass is controlled by the volume control on the subwoofer.
Thereafter the volume can be regulated on the amplifier as usual.
3.1 Option 1 (Thunder, Challenger, Magic and Charisma series)
If your amplifier has a subwoofer output, connect the subwoofer to this with a shiel-
ded RCA cable. If you have an LFE input use it, otherwise, choose Mono or Line IN R.
To increase the bass more, you can connect a Y cable that share the RCA cable to
the two connectors that you connect to Line IN R and Line IN L. Remember to turn
the subwoofer output on your amplifier.
3.2 Option 2 (Thunder, Challenger, Magic and Charisma series)
If the amplifier has separate preamp outputs on the left and right channels, connect
these to the subwoofer Line IN R and Line IN L. Use a shielded dual RCA.
3.3 Option 3 (Challenger and Magic series)
If your amplifier does not have subwoofer output, you can connect your subwoofer
with a conventional speaker cable through the Hi-Level-IN. The subwoofer is then
parallel connected with the front speakers to the amplifier speaker outputs. On the
subwoofer connect the left and right cable Left Hi Level IN and Right Hi Level IN.
Attention! Make sure to connect + to + and – to –.
4. Settings on your subwoofer
You can change all knobs and switches while the amplifier is on.
4