HighPoint RR640L 설치 매뉴얼 - 페이지 3

{카테고리_이름} HighPoint RR640L에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RR640L 13 페이지. Controller linux debian
HighPoint RR640L에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지)

페이지 인쇄

RR640L UEFI Windows BootRAID Installation Guide

Prerequisites for a Bootable RAID Configuration

The RR640L controllers can support bootable RAID arrays. After configuring an array using

the UEFI RAID tool, you can install a Windows or Linux operating system to the RAID. In

order to configure a bootable RAID array, you will need the following:

RAID controller. A PCIe 3.0/4.0 slot with x4, x8 or x16 lanes.

2. The RR640L must be installed into a PCIe 3.0/4.0 slot with x4, x8 or x16 lanes.

3. The motherboard needs to be booted into UEFI mode. Confirm that the motherboard

boots in UEFI mode.

4. USB flash drive: FAT32 format. Make sure the file system of the USB flash drive is

FAT32 format.

5. Secure Boot must be disabled.

6. Install an optical drive into the system (such as a DVD-ROM, DVD-RW or Blu-Ray

drive).

7. Prepare the OS Installation disc (Windows 10 & later / Windows server 2016 & later, or

a Linux Distribution that corresponds with the binary diver you intend to install).

Download and burn an official copy of the latest ISO image of your preferred operating

system to a DVD. This should be inserted into the optical drive when booting the system.

8. You will need a USB flash drive– the UEFI package and driver should be extracted to

the root directory of this flash drive.

9. Remove all other drives during the OS installation process. Make sure only the controller,

the USB flash drive, and the optical drive are installed into the system during this

procedure. This includes any other USB hard drives, USB flash drives, memory sticks, or

SAS/SATA drives. You can reattach these drives after the operating system has been

successfully installed.

10. For Windows 10 users, make sure to Disable Fast Boot.

3/13