Emerson FB2100 현장 교체 매뉴얼 - 페이지 15

{카테고리_이름} Emerson FB2100에 대한 현장 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson FB2100 16 페이지. Flow computer i/o terminal board
Emerson FB2100에 대해서도 마찬가지입니다: 현장 교체 매뉴얼 (16 페이지), 현장 교체 매뉴얼 (8 페이지), 현장 교체 매뉴얼 (14 페이지), 현장 교체 매뉴얼 (16 페이지)

페이지 인쇄

FB2100/FB2200 Flow Computer Battery Field Replacement Guide

Now disconnect the old battery from its connectors and set the old battery aside (be sure to

dispose of it safely in accordance with local regulations).

Old Battery (left) Disconnected; New Battery (right) Remains Connected

Pick up the new battery and align it with the lower left edge of the battery compartment

with the writing on the battery facing out and the connectors on the upper right-hand side.

Press it against the back of the compartment so the fastener pad on the back of the battery

secures to the back of the battery compartment. Route the wires of the free portion of the

battery cable so that they sit in the open area at the top of the battery compartment.

Rotate the electronics assembly up against the battery compartment and tighten the captive

fastening screws with a torque value of 2 to 4 in-lbs. (0.2 to 0.5 N-m) to close the

compartment.

10.

Close the flow computer enclosure.

D301823X012

November 2020