adeptus 53314 조립 지침 매뉴얼 - 페이지 13

{카테고리_이름} adeptus 53314에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. adeptus 53314 15 페이지.

ASSEMBLE 5X DRAWER BOX

IMPORTANT: MAKE SURE THE GROOVES IN THE DRAWER FRONT AND BOTH SIDES ALL ALIGN BEFORE

TIGHTEENING THE SCREWS.

1. ALIGN THE DOWELS

IN THE DRAWER SIDES

WITH THE PRE-DRILLED

HOLES IN THE DRAWER

FRONT AND PUSH UNTIL

THE PARTS ARE FLUSH.

4. SLIDE IN THE DRAWER

BOTTOM. MAKE SURE IT

IS ALL THE WAY FORWARD

& IN THE GROOVE ON THE

DRAWER FRONT.

B = 40

C = 10

Screw

3.5x30mm

NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HERE IN ARE COPYRIGHTED.

2. USE THE DRAWER BACK

TO SUPPORT THE DRAWER

SIDES. THEN SECURE THEM

TO THE DRAWER FRONT.

5. MAKE SURE THE DRAWER

BOTTOM IS IN THE GROOVE

IN THE DRAWER BACK AND

THE DRAWER BACK IS FLUSH

WITH THE DRAWER SIDES.

SECURE WITH 2 PART C ON

N = 10

Knob

4.0x40mm

NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HEREIN ARE COPYRIGHTED.

EACH SIDE.

3. REMOVE THE DRAWER

BACK.

6. ATTACH THE KNOBS TO

THE DRAWER FRONT.

13-15