HighPoint RocketAIC 7540HW 매뉴얼 사용 - 페이지 15

{카테고리_이름} HighPoint RocketAIC 7540HW에 대한 매뉴얼 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketAIC 7540HW 19 페이지. Using nvme raid aics with the dell precision 3930 rack workstation
HighPoint RocketAIC 7540HW에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (19 페이지)

페이지 인쇄

Using HighPoint NVMe RAID AICs with the Dell Precision 3930 Rack Workstation

4. Uninstalling a HighPoint NVMe RAID AIC from the Dell

Precision 3930 Rack Workstation

4.1 Uninstall hardware

4.1.1 Recommended tools

a. Screwdriver (system cover require a screwdriver to open)

b. Wired ESD wrist strap (to prevent electrostatic accidents)

4.1.2 Uninstalling hardware

a. Use a wired ESD wrist strap that is properly grounded.

b. Shut down the system.

c. Insert a screwdriver and turn counterclockwise to unlock the system cover

latch.

d. Lift the latch upward to remove the system cover.

e. Remove the riser1 module from the system.

f. If you are using the SSD7140A, SSD7540, RocketAIC 7140AW, or RocketAIC

7540HW, you will need to disconnect the power cable to the 8-pin power

connector on the system and to the 6-pin power connector on the HighPoint

NVMe RAID AICs.

Note:

If you are not using SSD7140A, SSD7540, RocketAIC 7140AW, or

RocketAIC 7540HW, you can safely move to the next step.

g. Pull the riser1 module latch and push the release tab on the PCIe slot.

h. Holding the edge of the HighPoint NVMe RAID AIC, lift up to remove the