DD ArrowV5 조립 설명서 - 페이지 9

{카테고리_이름} DD ArrowV5에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DD ArrowV5 18 페이지.

Now when kevlar thread is in place and carbon rods are already glued in place put plane again

on flat table. Use some weights to press it down to table. Now double check vertical fuselage

position and apply some CA glue in center of fuselage.

Now you can glue two support SFG's from depron to wing support carbon rod.

This is optional aileron reinforcement .

control become little more precise. For milled version of Arrow this is highly

recommended. But if you have regular Arrow version and don't have time skills to do this

upgrade, its not necessary. Your Arrow will fly just fine.

This upgrade make ailerons much stronger and roll