adeptus 56114 조립 지침 매뉴얼 - 페이지 14
{카테고리_이름} adeptus 56114에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. adeptus 56114 15 페이지.
페이지 인쇄
13
ATTACH 5X DRAWER RUNNERS
1. POSITION THE RIGHT DRAWER RUNNER "DR" WITH THE WHEEL TOWARD THE BACK OF THE DRAWER
AND THE FRONT END ALL THE WAY FORWARD TOUCHING THE DRAWER FRONT.
2. FIRST SCREW GOES IN THE THIRD HOLE BACK FROM THE DRAWER FRONT.
3. SECOND SCREW GOES IN THE FIFTH BACK HOLE FROM THE DRAWER FRONT.
4. THIRD SCREW GOES IN FROM THE SIDE THROUGH THE FIRST HOLE IN FRONT OF THE WHELL.
5. REPEAT THE PROCESS ON THE LEFT SIDE AND FOR EACH DRAWER.
E
E
E
E = 30
O = 05 (Right Side)
Screw (Drawer Runner
Drawer Right Runner
to Drawer side & anti-tip)
DR
3.0x16mm
14
INSERT THE DRAWERS IN THE UNIT
1. START AT THE BOTTOM AND WORK UP.
2. HOLDING THE FRONT END OF THE DRAWER SIDES, TILT THE BACK OF THE DRAWER UPWARDS TO
GET THE WHEELS ON THE DRAWER PAST THE WHEELS ON THE UNIT. ONCE THE WHEELS ARE CLEAR,
LEVEL OUT THE DRAWER AND SLIDE IT IN.
NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HERE IN ARE COPYRIGHTED.
DL
P = 05 (Left Side)
Drawer Left Runner
NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HEREIN ARE COPYRIGHTED.
E
E
E
DR
DL
DO NOT STORE HEAVY
ITEMS IN THE TOP
DRAWERS. HEAVIER ITEMS
SHOULD BE STORED IN THE
LOWER DRAWERS TO
REDUCE THE POSSIBILITY
OF TIP-OVER.
14-15