DD-EFI Pro Dash 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} DD-EFI Pro Dash에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DD-EFI Pro Dash 5 페이지.

The DD-EFI Pro Dash has (2) I/O Connectors for Sensors and Digital Inputs. Below are diagrams outlining what each Pins

location, function, and wire color in the 12 Pin and 10 Pin black connectors. Provided: Sensor and Digital Wiring

Harnesses, 2:6 Lever Lock Connector, (4) T-Tap Connectors (Used for: Fuel Level, L/R Turn Signals, High Beam)

Sensor Connector

•

(5) ADC (Analog) Inputs:

o Sensor 5, this is pre-configured in DD-EFI Dashboards

for Oil Pressure

o Requires a Digital Pressure Sensor or we offer one at

https://dd-efi.com/collections/accessories

•

The

5V Sensor (Red Wire)

get used for all Sensors 1-5 as outlined in the diagram to the

right. Provided is a 2:6 Level Lock Connector to simplify the

wiring process.

•

Fuel Level (Yellow Wire) has an internal circuit making the

wiring of your factory vehicle fuel sending unit a single wire

connection. Attach the yellow wire to the fuel level's signal

wire. Provided T-Tap Wire Connector for easy connection

o Don't forget to choose the correct fuel level gauge

for your vehicle due to having different empty/full

ohm readings

o Direct connection from the sender; no slosh module

I/O Connectors

and Ground Sensor (Black Wire)

Sensor Connector

Wiring Video

3 | P a g e