HighPoint RocketRAID 174x 설치 매뉴얼 - 페이지 6

{카테고리_이름} HighPoint RocketRAID 174x에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketRAID 174x 8 페이지. Sata ii controller

페이지 인쇄

Rocket RAID 174x FreeBSD Installation Guide

the RR174x Controller, you can perform the following steps.

Step 1 Copy the Driver Module

If you have made freebsd drivers into a diskette, you can insert the driver diskette to

floppy drive, then using the following commands to copy the driver module:

for FreeBSD 4.x:

# mount –o ro /dev/fd0 /mnt

# cp /mnt/rr174x-xxx.ko /modules/rr174x.ko

# umount /mnt

for FreeBSD 5.x/6.x:

# mount –o ro /dev/fd0 /mnt

# cp /mnt/rr174x-xxx.ko /boot/kernel/rr174x.ko

# umount /mnt

You can also extract the files from .img files directly, without using a floppy diskette:

For FreeBSD 4.x:

# vnconfig vn0c freebsd_xxx.img

# mount /dev/vn0c /mnt

# cp /mnt/rr174x-xxx.ko /modules/rr174x.ko

# vnconfig –du vn0c myfilesystem mount=/mnt

For FreeBSD 5.x/6.x:

# mdconfig –a –t vnode –f freebsd_5.x.img –u 0

# mount /dev/md0 /mnt

# cp /mnt/rr174x-xxx.ko /boot/kernel/rr174x.ko

# umount /mnt

# mdconfig –d –u md0

Step 2 Test the Driver Module

You can test out the module to ensure that it works for your system by load it during

system booting.

If the module has been loaded successfully you should see the RR174x banner and a

display screen of the attached drives. You can now access the drives as a SCSI device (if

you have no other SCSI device, the first device is /dev/da0, then /dev/da1, etc.).

Example

FreeBSD

Default: F1

>> FreeBSD/i386 BOOT

Default: 0:ad(0,a)/boot/loader

boot:

BTX loader 1.00 BTX version is 1.01

Console: internal video/keyboard

BIOS driver A: is disk0

BIOS driver C: is disk2

BIOS 636kB/74512kB available memory

FreeBSD/i386 bootstrap loader, Revision 0.8

(mailto:[email protected], Sat Apr 21 08:46:19 GMT 2001)

Loading /boot/defaults/loader.conf

/kernel text=0x24f1db data=0x3007ec+0x2062c -

<- For FreeBSD 5.1 and later: select "6" on "Welcome to FreeBSD" screen.

Hit [Enter] to boot immediately, or any other key for command prompt.

- 4 -