Emerson FB1200 교체 매뉴얼 - 페이지 16

{카테고리_이름} Emerson FB1200에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson FB1200 18 페이지. Flow computer coin cell battery field
Emerson FB1200에 대해서도 마찬가지입니다: 종단 보드 현장 교체 매뉴얼 (18 페이지), 현장 교체 매뉴얼 (14 페이지), 현장 교체 매뉴얼 (20 페이지), 현장 교체 매뉴얼 (8 페이지), 현장 교체 매뉴얼 (8 페이지), 교체 매뉴얼 (8 페이지)

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide

D301820X012

November 2020

13.

14.

15.

You can now plug your new terminal blocks back into the termination board, leaving TB1

last for when you want to restore power.

Carefully align the end cap threads with the threads of the enclosure and replace the rear

end cap. Screw the end cap clockwise (eight full turns) until it is tightly sealed to the

enclosure. Endcaps must have at least 8 full threads engaged upon reassembly.

Note

If you need more leverage place a long screwdriver or other appropriate tool across the two

notches in the cover to act as a pry bar.

If applicable, tighten the retaining clamp using the screw and washer onto the end cap

using a 3mm hexagonal wrench. When tightening, torque to 10 to 12 in-lbs (1.1 to 1.4

N-m).