Emerson FB1200 현장 교체 매뉴얼 - 페이지 4

{카테고리_이름} Emerson FB1200에 대한 현장 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson FB1200 8 페이지. Flow computer coin cell battery field
Emerson FB1200에 대해서도 마찬가지입니다: 종단 보드 현장 교체 매뉴얼 (18 페이지), 교체 매뉴얼 (18 페이지), 현장 교체 매뉴얼 (14 페이지), 현장 교체 매뉴얼 (20 페이지), 현장 교체 매뉴얼 (8 페이지), 교체 매뉴얼 (8 페이지)

FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide

D301816X012

November 2020

WARNING

EXPLOSION HAZARD – Do not disconnect equipment unless power has been removed or the

area is known to be non-hazardous.

DANGER

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.

Performing this operation in a hazardous area could result in an explosion.

DANGER

EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing cover(s) in a

hazardous location could result in an explosion.

Important

If this equipment is used in a manner not specified by the manufacturer, the protection provided by

equipment may be impaired.

Important

The HMI module includes the Wi-Fi transceiver; once you remove the HMI module; Wi-Fi

communication with the flow computer ceases.

Removing/Replacing the HMI Module

UL Listed HMI Module Field Installed Accessory Kit for Use in Class I, Division 1, Groups C&D and

Class I, Division 2, Groups A, B, C, and D



WARNING

EXPLOSION HAZARD –Never remove end cap(s) in a hazardous location. Removing cover(s) in a

hazardous location could result in an explosion.

Flow Computer HMI Module Display Assembly with LCD and Wi-Fi Field Installed Accessory

Kit Part No. 399379-01-0 for use with UL Listed Model Series FB1100 and FB1200.

Flow Computer HMI Module Display Assembly with LCD and without Wi-Fi Field Installed

Accessory Kit Part No. 621627011-KIT for use with UL Listed Model Series FB1100 and

FB1200.

Flow Computer HMI Module Display Assembly without LCD and with Wi-Fi Field Installed

Accessory Kit Part No. 399380-01-0 for use with UL Listed Model Series FB1100 and FB1200.

Flow Computer HMI Module Display Assembly without LCD and Wi-Fi Field Installed

Accessory Kit Part No. 621627020-KIT for use with UL Listed Model Series FB1100 and

FB1200.

Remove the retaining clamp on the front end cap (if present) using a 3 mm hexagonal

wrench.